Vi använder cookies för att hjälpa oss att förbättra vår webbsida. Läs vår Cookie Policy .

Kunskapsbas

Kompatibilitet
ASUSTOR College
Download Center
Online hjälp
Online Support Form

Allt »

Q: How do I install a NAS?

2023-09-01


#NAS #install #FAQ

To install ASUSTOR NAS, follow these steps:

  1. Make sure you have received your ASUSTOR NAS equipment, along with all the required accessories, including power cords, network cables, etc.
  2. Choose a suitable location for the ASUSTOR NAS, making sure it is in a well-ventilated area, away from heat sources, direct sunlight, etc.
  3. Connect the ASUSTOR NAS device to the network and power supply. First, plug the power cord of the ASUSTOR NAS into a power outlet, and then plug the network cable into the network port of the ASUSTOR NAS and an available port on your router.
  4. Power on the ASUSTOR NAS device. Press the power switch and wait for a while until the ASUSTOR NAS device is fully powered on.
  5. Download and install the control interface software for the ASUSTOR NAS. You can download the ASUSTOR Control Center from the ASUSTOR website, then run the software and scan your network for an ASUSTOR NAS device connected to the network. Once you have found the device, click the Connect button.
  6. Follow the prompts to set up the device. You can change the ASUSTOR NAS settings such as network settings, user accounts and passwords as needed.
  7. After completing the setup, you are now ready to use your ASUSTOR NAS device. You can upload files to NAS or download files from NAS. In addition, you can also connect to your ASUSTOR NAS device remotely by setting up Remote Access to use your ASUSTOR NAS device while you are away from home.

Learn more :
https://www.asustor.com/getting_start/landing

var den här artikeln hjälpsam? Ja / Nej