Korzystamy z ciasteczek, aby ulepszać naszą stronę. Prosimy przeczytać naszą politykę dotyczącą ciasteczek .

Baza wiedzy

Wszystko »

Q: How to use Seagate IronWolf Health Management?

2021-09-30






If you are using a Seagate IronWolf or IronWolf Pro series hard disk with a capacity more than 4TB(capacity less than 4TB not supported), just navigate to [Storage Manager] → [Disk] → [Disk Doctor] and the [IronWolf Health Management] window will appear. You can use this function to schedule or immediately carry out a scan.


https://www.seagate.com/internal-hard-drives/hdd/ironwolf/




After using IronWolf Health Management to scan your hard disks, the results will be shown either as “healthy” or a numerical output code. Please see the chart below to see the suggestions represented by the codes.





After a scan is complete, all scan result codes will be recorded in the ADM event log. In the future, just open the event log to take a look at any previous IHM scan results.




*You can go ADM-App Central-Installed to remove the IronWolf Health Management app if you don't want to use the feature.

*If you are getting code 81, it means the hdd is too new to have enough data point to display.

Czy artykuł był pomocny? Tak / Nie