Learn how to control ASUSTOR Portal with the ASUSTOR Remote Control and AiRemote.

COURSE OBJECTIVES

Upon completion of this course you should be able to:

1. Use the ASUSTOR Remote and AiRemote to control ASUSTOR Portal.

PREREQUISITES

Course Prerequisites:

NAS 135: Introduction to ASUSTOR Portal

Students are expected to have a working knowledge of:

None

OUTLINE

1. Using the ASUSTOR Remote Control

1.1 Functionality with ASUSTOR Portal

1.2 Functionality with Firefox

2. Using AiRemote

2.1 Installing AiRemote and connecting to your ASUSTOR NAS

2.2 Basic modes of operation for AiRemote

2.3 AiRemote functionality with Firefox

1. Using the ASUSTOR Remote Control

Note: Please make sure that ASUSTOR Portal has been installed on your NAS. Please refer to here for installing ASUSTOR Portal.

System requirements: AS31, AS32, AS50, AS51, AS52, AS53, AS54, AS61, AS62, AS63, AS64, AS66, AS67, AS70, FS67.

• Click on [Settings] [Hardware], and click on [Enable infrared receiver] to make sure that NAS can receive signals from ASUSTOR Remote Control.

1.1 Functionality with ASUSTOR Portal

The graphic below illustrates the key functions when using the ASUSTOR Remote Control with ASUSTOR Portal.

• AS-RC10

• AS-RC13

1.2 Functionality with Firefox

The graphic below illustrates the key functions when using the ASUSTOR Remote Control during web browsing with Firefox.

• AS-RC10

• AS-RC13

Note:
The ASUSTOR Remote Control is suitable for use with AS-2TE, AS-3, AS-6* series devices and AS31, AS32, AS50, AS51, AS52, AS53, AS54, AS61, AS62, AS63, AS64, AS66, AS67, AS70, FS67 series devices.
If you wish to purchase an ASUSTOR Remote Control you may do so from your local ASUSTOR distributor or from the official ASUSTOR Accessories Store: [AS-RC13]. (AS-RC10 has been EOL)

*AS-6 series users will need to purchase an additional infrared receiver in order to use the ASUSTOR Remote Control.

2. Using AiRemote

Note: Please make sure that ASUSTOR Portal has been installed on your NAS. Please refer to here for installing ASUSTOR Portal.

System requirements: AS31, AS32, AS50, AS51, AS52, AS53, AS54, AS61, AS62, AS63, AS64, AS66, AS67, AS70, FS67.

2.1 Installing AiRemote and connecting to your ASUSTOR NAS

STEP 1

• Locate and install AiRemote by scanning the QR codes below or by searching for AiRemote in the Apple App Store or Google Play.

Android	iOS

STEP 2

• After installation has completed, open AiRemote on your mobile device.
• AiRemote will now scan your local network for ASUSTOR NAS devices. Select the NAS of your choice to connect to it.
  (You can also select [Connect via IP] and directly enter the LAN IP address of the NAS you wish to connect to).

Note: Please turn on the Wi-Fi of the mobile devices and make sure that the NAS and the mobile devices are connected to the same network (LAN).

2.2 Basic modes of operation for AiRemote

AiRemote has two basic modes of operation:

• Remote Mode:

  Remote Mode functions much the same as a regular remote control, using the up, down, left, right and OK buttons to control ASUSTOR Portal.

• Touchpad Mode:

  Touchpad mode functions much the same as a touchpad on a laptop computer. It comes complete with simulated left and right mouse buttons that allow you to intuitively control ASUSTOR Portal.

The graphics below will illustrate the functionality of both modes of operation.

• The functionality on the server list:

2.3 AiRemote functionality with Firefox

When using the Firefox web browser, switching to AiRemote's Touchpad Mode will provide you with a more intuitive usage experience. The graphic below illustrates the key functions when using Touchpad mode with Firefox.

• The keyboard input function is illustrated in the graphic below.