Q: What is the proper speed when I access the NAS

2024-08-07

The proper speed when accessing a NAS can vary depending on several factors including the NAS hardware specifications, the type of network connection, the client device capabilities, and the nature of the data being transferred. Here are some typical speed expectations:

1. Gigabit Ethernet (1 Gbps):

• Typical Speed: 80-120 MB/s

• Most common in home and small office environments.

• Ensure both NAS and client device support Gigabit Ethernet.

2. 2.5 Gigabit Ethernet (2.5 Gbps):

• Typical Speed: 250-300 MB/s

• Provides a middle ground between 1 Gbps and 10 Gbps, offering significantly higher speeds without the cost and complexity of 10 Gbps.

• Requires compatible network infrastructure, including switches, cables, and NICs (Network Interface Cards).

• Cat5e cables are sufficient for 2.5 Gbps at distances up to 100 meters.

3. 10 Gigabit Ethernet (10 Gbps):

• Typical Speed: 800-1200 MB/s

• Used in professional and enterprise environments for high-speed data transfers.

• Requires compatible network infrastructure, including switches, cables, and NICs.

• Cat6a or Cat7 cables are recommended for 10 Gbps.

4. Wi-Fi (802.11ac or 802.11ax):

• Typical Speed: 30-80 MB/s (varies widely based on signal strength, interference, and network congestion)

• Wi-Fi is less consistent than wired connections and speeds can fluctuate.

You can check the network interface bandwidth in the ADM-Settings-Network-Network Interface page.